This state-of-the-art power base is a 208cc OHV, all-season 4-cycle engine. The rugged Latch 'n Lock' system has endured the Troy-Bilt® test of quality, with hundreds of hours of accelerated use - and is fully integrated with a self-propelled transmission for easy operation.
It is recommended to always inspect the air filter before each use and every 5 hours of operation. When the air filter is ready to be changed, make sure that the engine is upright and level. It is best to change the air filter after every 100 hours of use or every season.
Instructions
Step 1:
First, remove the safety key.
Step 2:
Remove the engine cover using the phillips head screwdriver.
Step 3:
Carefully, disconnect the spark plug wire keeping it away from the spark plug.
Step 4:
Press the tabs on the air filter cover, lifting it up off the engine.
Step 5:
Replace the air filter with the genuine part made specifically for the FLEX Power Base.
Step 6:
Then, place the air filter cover back over the new air filter until the tabs click into place.
Step 7:
Take and engine cover and place it over the engine, securing it with the two bolts using the phillips head screw driver.
Step 8:
Reconnect the spark plug and turn the engine on to ensure proper starting.
Step 9:
Re-install the safety key.
